Folding electric bike wheel clamping force and the pedal clearance

Folding electric bike wheel clamping force and the pedal clearance
  Wheel clamping force
 Flyhorse Folding electric bikes wheels should be an effective locking device secured to the frame, and tighten (front 19.6Nm, rear 30N.m) in accordance with the manufacturer. Removing the direction along the front wheels, the front axle of the force applied to symmetric 500N time 30S, no relative displacement between the front axle and the front fork; detaching direction along the rear wheels, the rear axle 1780N of force symmetrical, time 30S , no relative displacement between the rear axle and the frame.

12
  Pedal clearance
  A pedal at its lowest position and the pedal plane parallel to the ground, the folding bikes electric is inclined 25 ° to the side and any parts of the pedal does not touch the ground; the crank parallel to the longitudinal axis of the electric bicycle, pedal centerline ago the closest distance the arc of rotation of the tire or front fender is not less than 89mm.

Folding electric bicycle general requirements

  electric folding bicycles should be the model requires assembly can not be wrong installation, leakage loaded; each fastener to be tightened in place, all rotating parts should be flexible operation; each member should be symmetrical and symmetrical about the center of the frame surface, no obvious bias oblique; transmission and braking systems should be installed correctly, flexible manipulation; folding electric bikes does not allow the moving parts of the movable member relative to grazing.

About electric folding bikes,

 Folding electric bikes,  in fact, is an ultra-lightweight Flyhorse Electric Bikes, but it is different from the general electric bike, it is unique in the fact that products are small, foldable, compact design, excellent materials and sophisticated manufacturing process . Production of materials using magnesium alloy and other special material made of light, very light weight. Vehicle integrally molded, using magnesium alloy materials, aluminum foot and so on.

Folding electric bike appearance requirements

Flyhorse Folding electric bikes appearance requirements
Folding electric bikes all the exposed parts of the surface should be clean and free of stains, rust, trademarks, decals should be complete, clear, correct position; bike chrome parts should be uniform color, bright, without blistering, peeling, burning black, open at the end, dew yellow and obvious glitches, piebald, pinholes, pitting and other defects; galvanized as by white passivated surface color should be uniform, not blistering, clear stripes, burrs and other defects, such as by color passivated process, not a bubble, burr until defects; paint the exposed front side members are not allowed cracks and visible scar flow, build sand, wrinkled skin, missing paint and other defects; aluminum oxide film should be exposed pieces continuous and uniform, dense color uniform, without aging, burning, chalking, flaking, open at the end, after the spot effect and obvious bumps, water stains, flow scar, stripes and other defects; surfaces of the plastic parts should be uniform color, no obvious burr, scratches, cracks and depressions.