Luminous glow in the dark pebbles spraying operations Safety Measures

A spraying operations personnel must undergo safety training, are not allowed to work without training.photoluminescent pigment suppliers Must conduct a comprehensive inspection of all equipment and tools before painting 2 paint job, confirmed before work, no problem.3 paint workplace ventilation cleaning should conform GB 6415 requirements.tions, enterprise security technology sector should set up special timed in the air in a confined space measuring oxygen content and concentration of combustible gas, oxygen content should be more than 18%, combustible gas concentration should be less than 10 percent of the lower explosive limit.5 paint job cabin equipped with at least two or more co-operation, if the workplace is too small, can only accommodate one-man operation, the other person should be responsible for monitoring.6 high paint job should follow the "ship construction high operating safety regulations."Support simultaneous operation over seven guns must be opened spacing (about 5m), according to a certain, in the same direction for spraying.8 special coating operations, its spray equipment and hoses should be set up by professionals, if the equipment fails or there are unusual circumstances, the withdrawal of

extravehicular first notify the cabin staff by service personnel.9 airless spray high-pressure jets and leaks can cause serious injury, the job should be done:. a gun nozzles are not allowed at any time against others and their own;.Photoluminescent Tumbled Gravel b must not touch the nozzle with a finger, or peep muzzle; c when cleaning the gun, to drive off the pump source, let go of stress, and safety devices are sold guns to be cleaned;d. When the gun is stopped, you must live in the safety latch.10 After work is completed, the gun must promptly withdraw extravehicular, ventilation and continue until the film is completely cured.After 11 paint job, the workplace should be clean, paint and solvents remaining promptly returned to the warehouse, are not allowed to misplacing.12 The operator must wear protective masks, rubber gloves, protective goggles, and other related products.Problems and Solutions